Hydraulic lift
19th January 1973, Page 68
19th January 1973
Page 68
Page 68, 19th January 1973
— Hydraulic lift
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
A hydraulically lifted platform mounted on a turntable and developed by Liftec Engineering can be supplied for working heights of 25, 28 or 30ft with safe working loads of 250400lb.
The Liftec LD /4 has two elevating brooms separated by hydraulic rams; the platform is levelled by fixing rods.
Operation is either from the platform, or overriding controls at the turntable base.
The booms stow down 5in. apart and parallel to one another making them adaptable for mounting horizontally above the level of workshop cab on a truck or at a lower level on a light vehicle.
The hydraulic pump may be driven by pto, auxilliary engine or battery-powered electric motor. Made by: Liftec Engineering Ltd, PO Box 8, Berkhamsted, Herts.