Spray-gun
19th January 1973, Page 67
19th January 1973
Page 67
Page 67, 19th January 1973
— Spray-gun
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
The BroomWade BEN spraygun, the PS3-XM, has been produced for spraying quick-drying materials when used with compressors of low capacity 1.8-2.3 cu ft per run and low pressure 20-30 psi (1.4-2.1 bar).
The spray-gun, it is claimed, overcomes the problems of obtaining a good finish normally associated with .a low-capacity air supply. It incorporates an aluminium, pressurized paint container, with a safety blow-off valve set at 40 psi (2.76 bar), a constant-bleed system and it has a fixed fan-spray pattern for rapid application.
Made by: Broom and Wade Ltd, PO Box 7, High Wycombe, Bucks.