AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

THE ROADS AND TRANSP( EXHIBITIOI RETURNS

18th July 1947, Page 42
18th July 1947
Page 42
Page 43
Page 44
Page 47
Page 42, 18th July 1947 — THE ROADS AND TRANSP( EXHIBITIOI RETURNS
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

AT noon on Monday next, July 21, at Olympia, London, Mr. C. R. Attlee, the Prime Minister, will open the first post-war Public Works, Roads and Transport Congress and Exhibition. The Minister of Health, Mr. Aneurin Bevan, who is president of the Congress, will take the chair at the opening ceremony, and other speakers will include Sir Roger Hetherington, acting chairman of the Congress Council, in place of the late Sir Frederick Cook.

Local authorities have appointed a total of 1,250 delegates to the Congress and Exhibition, which will remain open until July 26. The doors will be open from 10.30 a.m. until 6.30 p.m. each day, and the cost of admission is 2s Many important papers will be submitted to delegates, and reviews of those of special interest to readers of The Commercial Motor" will be published next week. Exhibits related to transport are dealt with in these pages, and include a new 20-ton dump truck and several refuse collectors of recent introduction.

Apart from the exhibits reviewed, road materials will be seen on many stands, and the British Road Federation will stage an exhibition of modern road-building technique. "The Commercial Motor" will be found on Stand 106 of Temple Press Ltd., where visitors will be welcomed.

The new dumper, of 13 cubic yd. capacity, will be shown on Stand 52 by John Blackwood Hodge and Co., Ltd„ Hunsbury Works, Northampton. It comprises a four-wheeled tractor with a General Motors model 6/71 150 b.h.p. oil engine, and a two-wheeled semi-trailer with full-length "bomb doors," through which the load can be discharged. The speed range of the vehicle when laden is said to be from 2.5 m.p.h. to 26 m.p.h. The hopper is wedge shaped and is designed to distribute a large part of the payload over the driven axle. The bottom doors are opened by gravity and closed by pneumatic power.

By way of contrast, lighting fittings of many kinds, including the special Mazdalux equipment for fluorescent lighting in public-service vehicles, will be seen on Stand 5 of the British Thomson-Houston Co., Ltd., Watford.

The need for economizing in manpower has caused close attention to be focused on mechanical handling. One of the most useful items of equipment for this purpose is the fork truck, of which an example will be shown on Stand 18 by Coventry Climax Engines, Ltd., Coventry. The truck is capable of lifting a load of 4,000,1b. to a height of 12 ft., by hydraulic power, and of travelling at speeds up to 91m.p.h., either forward or in reverse. A four-cylindered petrol engine developing 27 b.hrp. is fitted. Pneumatic tyros and hydraulic steering are other features.

Probably the most interesting exhibit of Dennis Bros., Ltd., Guildford, will be the new H.R.C. refuse collector, which was seen for the first time at the Public Cleansing Conference at Blackpool. It was described and illustrated in "The Commercial Motor" of June 20, and the outstanding feature of its design is the use of a

hinged rear hopper, which is raised when tipping • to allow the unobstructed passage of refuse. Compression gear enables 16-18 cubic yds. of refuse to be carried.

Another. Dennis refuse collector to be shown on Stand 55 will be a 10 cubic yd. side-loading model for Hollingbourne Rural District Council. The body is mounted on a forward-control chassis of 9-ft. 6-in. wheelbase.

A gully-emptier and a cesspool-emptier, both of 800gallon capacity and incorporating chassis of 11-ft. 6-in. wheelbase, will also be seen. The gully-emptier is for St. Pancras Borough Council, and the cesspool-emptier for Bagshot Rural District Council.

Apart from its products to be shown on the stands of other manufacturers, the Eagle Engineering Co., Ltd., Warwick, will have an imposing display of its own (Stand 67). Standing "head and shoulders " above the other exhibits will be an hydraulically operated three-stage tower and workshop body mounted on a Karrier CK3 chassis. The tower extends to a maximum height of 22 ft. and carries a revolving platform.

The Eagle 750-800-gallon vacuum gullyand cesspit-emptying equipment will be seen on the Bedford 5-ton chassis, this vehicle having been built to the order of the Clevedon Urban District Council. In addition to the standard gear, the vehicle is equipped with gravity sprinkler heads at the front.

There are also to be two refuse collectors, one a 11-12 cubic-yd. side-loading Derby type based on an Austin 5-ton long-wheelbase chassis, and the other a 7 cubic-yd. outfit with a Morris-Commercial CVS11/40 chassis. Metal sliding covers in three sections are fitted on each side. The fifth exhibit will be a trailer road sweeper, suitable for towing by a tractor or vehicle.

Except for a 25-ft. three-stage tower wagon based on the Thames 2-ton chassis, the exhibits of the Ford Motor Co., Ltd., Dagenham (Stand 36), will be similar to those seen at Blackpool. They will comprise a Thames 3-ton 7 cubic-yd. refuse collector, a• Thames 5-ton Derby-type 12 cubic-yd. refuse collector, and a Thames 4-ton 500-gallon combined gullyand cesspoolemptier. The body of the Derby-type vehicle and the tower are by the Eagle Engineering Co., Ltd., Warwick, and the bodywork and equipment of the 7 cubic-yd. refuse collector and gully-emptier are by Tuke and Bell. Ltd., Lichfield.

The tower is lifted by hydraulic gear and is surmounted by a revolving platform measuring 7 ft. 8 ins.

(6) Eagle 600-gallon gullyand cesspit-emptying equipment is fitted to this Bedford, to be shown by Vauxhall Motors, Ltd. (7) Among several exhibits of industrial trucks will be

the Lister Auto truck model RHC,,NU9 with elevating platform.

by 3 ft. 3 ins. The platform can be turned by handoperated chain and pinion gear, and locked in any one of eight positions.

Glover, Webb and Liversidge, Ltd., 561, Oki Kent Road, London, S.E.1, intends to repeat the outstanding success that it scored at the Public Cleansing Conference at Blackpool with the new chassisless 12-cubic-yd.

refuse collector. This is entirely different from any refuse vehicle that has been produced in this country before. It has front-wheel drive, and the Meadows engine and gearbox, transmission, etc., are mounted on a sub-frame. The Transport power-driven moving floor serves as a basis for the body. Another advanced feature is the independent suspension system. (Stand 50.) Municipal engineers will be familiar with the products of Hall and Hall, Ltd., Hampton, Middlesex, which will show Halite jointings and packings, Hallprene synthetic rubber sheetings, mouldings and extrusions, and Hallite wire-bound non-rubber hose, which is particularly suitable for cesspool-emptiers and other tankers• Rubber and asbestos gaskets and joints for petrol and oil engines will also be seen. (Stand 34.) Prominent in the municipal field, Karrier Motors, Ltd., Luton, has arranged to exhibit six specialized models on Stand 61. The Bantam chassis serves as the basis of a 7-cubic-yd. refuse collector with semi-circular sliding covers and double rear doors. A six-seater cab is an outstanding feature of the CK3 10-cubic-yd. refuse collector, also with sliding covers fitted in three sections on each side.

The Transport moving platform is fitted to the CK3 15-cubic-yd. refuse collector, which also has a six-seater cab. The fourth refuse collector to be shown will be the Karrier-Yorkshire 15-cubic-yd. mechanical loader, in which hydraulic power is used to raise the bins to the top of the vehicle for the discharge of refuse. The CK3 chassis also forms the basis of this machine Other Karrier-Yorkshire machines to be exhibited will be a 750-gallon cesspool-emptier and 750-gallon gullyemptier.

For the past 15 years the name of H. Leverton and

11111

Co., Ltd., Spalding, has been connected with the import arid distribution of Caterpillar tractors, and an example of the powerful D8 model will be seen on the company's stand (37) at Olympia. This model is doing fine work in hauling earth-moving equipment and on open-cast coal sites. It has a six-cylindered oil engine of 1,246 cubic ins, piston-swept volume. The gearbox provides six forward and two reverse ratios.

Lewin Road Sweepers, Ltd., a subsidiary of J. Brockhouse and Co., Ltd., Hill Top, West Bromwich (Stands 40 and 54), will show a 10-20-cubic-yd. compressorrefuse-collection body mounted on a Thornycroft Sturdy chassis, and an 8-16-cubic-yd, body, also of the cornpressor type, mounted on an Austin chassis. The company's range of sprinkler-sweeper-collectors will be represented by an example based on the Thornycroft Nippy chassis, and by a Universal factory model.

Industrial trucks of the type to be exhibited on Stand 81 by R. A. Lister and Co., Ltd., Dursley, provide an economical means for transport in the works. Among the Auto-trucks to be seen will be a 1-ton pneumatic-tyred model with power-operated elevating platform. The machine is equipped with a J.A.P. 600 c.c. engine, which is mounted on the front steering assembly. Stillages for use with the machine, a sectioned engine and various subassemblies will also be on view.

L.O. Tractors, Ltd., Coupar Angus, Perthshire, plans to repeat the display put on at the Royal Show at Lincoln a fortnight ago. On Stand 89 will be seen two Caterpillar tractors, a D4 and D6, both fitted with bulldozers.

The Mercury Truck and Tractor Co., Ltd., 19, London Road, Gloucester, also specialize in vehicles for internal works transport and for local duty. An example of the 10F2 chassis will be seen equipped with eight street orderly bins, four on each side, with the lids connected to a centre ridge pole. Accommodation is provided for a mate as well as the driver. The brushes and two shovels are carried, and there is a locker for clothes.

Another Mercury chassis will be shown with an allsteel tipping body 3 ft. 9 ins. wide. The vehicle could be used for street tidying, for collecting kitchen waste or for carrying material for road repairs. (Stand 84.) The Buffalo-Springfield 6-8-ton tandem petrolengined roller will be shown by Miller (London), Ltd., 34, Victoria Street, London, S.W.1, on Stand 127. It has a wheelbase of 10 ft. 1/ ins., and its overall length is 14 ft. 8/ ins. Sprinklers are fitted on both rollers and are supplied by a pump driven from the engine. A tank of 100-gallon capacity is fitted above the driven roll, and spring-loaded adjustable scrapers are provided on each roll. The only exhibit of Geo. Monro, Ltd., Waltham Cross, which falls within the scope of "The Commercial Motor," is a nauledozer, which is a medium-sized

bulldozer. It was exhibited for the first time at the

British Industries Fair, this year. The basis of the machine is a Fordson Major tractor mounted on Rota ped half-tracks. The blade is 72 ins. wide and 21 ins. high, and it has a lift of 15 ins, above ground and a drop of 6 ins, below ground. (Stand 121.) Complying with all requirements of the Ministry of Transport for surfacing work on new roads, the Barber Greene finisher, a self-propelled machine, which will

receive and lay all types of bituminous material, will be shown on Stand 79 by Olding, Barber-Greene and Co.,

Hatfield The machine has a capacity of 80 tons per hour and the speed of operation varies from 8 ft to 44 ft. per minute for different surfaces.

Other interesting exhibits will be the type 522 bucket loader, which is designed to be towed behind a normal vehicle, and the type 661 coal loader, which is selfpropelled and will handle quantities up to 1 tons per minute.

Exceptional manceuvrability is an outstanding feature of Scarnmell municipal vehicles, which will be shown by

Semifluid! Lorries, Ltd., Watford, in the form of a side-loading 6 cubic yd. refuse

collector for loads up to 30 cwt., and an Esloo self-loading model. The mechanical horse provides the motive power.

The 6 cubic yd. type has a loading height of 4 ft. 6k ins., and the vehicle can turn in a 19 ft. 8 in. circle. In the Esloo, the refuse is loaded from the rear and the loading line is only 3 ft. 9 ins. (Stand 27.)

Those who attended the Public Cleansing Conference at Blackpool will remember that the Shefflex dustless refuse collector, based on the Dennis Pax chassis, caused favourable comment. It will be shown at Olympia on Stand 70 by Sheffiex, Ltd., Sheffield, 3. Bins are placed on a cradle close to the ground at the rear of the vehicle. The cradle is then raised mechanically to the top of the body, and after the refuse has been emptied through the automatically controlled dustless shutter, the bin is returned to the lower level. The load is automatically trimmed.

The Sheffiex Ideal 6 cubic yd. refuse collector, described as "semi-dustless," will also be seen. It can carry 3-3i tons and can be converted to dustless operation by.the fitting of the Shefflex dustless shutter. Another display of refuse collectors and a gullyemptier will be put up by Shelvooke and Drewry, Ltd., the well-known municipal specialist, of Letchworth

(Stands 108 and 87). The largest refuse vehicle has a hand-operated moving floor of rubber and cotton construction, and has a capacity of 24i cubic yds. The cab seats two loaders, in addition to the driver, and extra crew accommodation is available at the front of the body.

The other three are Chelsea models with all-steel sliding covers operating, in arched guides mounted on the body shell. They are of 13, 11.3 and 8.9 cubic yd. capacity. The smallest example is steered by tiller and has a cab for two persons, whereas the larger types have wheel steering and more capacious cabs. In the 13 cubic yd. pattern the cab accommodates six loaders as well as the driver.

The exhibit will be completed by a wheel-steered 1,100-gallon gully-emptier having compartments for sludge and sealing water. The suction pipe is 44 ins, in diameter.

Some old " friends " of transport engineers, in the form of Simmonds elastic stop nuts, Pinnacle metal diaphragm nuts, Spire tension locknuts, fixings and clips, and Fram filters, will appear on Stand 47 of Simmonds Aerocessories (Western), Ltd., Treforest, near Pontypridd. A feature will also be made of the recently* developed Pacitor electronic contents gauge produced by the concern.

Tractor Spares, Ltd., Willenhall Road, Wolverhampton, specializes in British-made replacement parts for

American track-laying tractors, and will feature these components. (Stand 31.)

As part of the energetic sales policy which is being pursued in connection with Brush electric vehicles, Treece (Birmingham), Ltd., 69-73, Richard Street, Birmingham, 7, will display on Stand 15 Pony electric trucks for door-to-door collection of kitchen waste and for other public-cleansing duties. Churchill axle stands will also be seen.

Top-Dog clutch and brake facings will be shown on Stand 97 by Hubert H. P. Trist and Co., Brislington, Bristol, 4. The clutch facings are of woven asbestos and moulded asbestos, and are made for a wide range of vehicles and appliances, including agricultural and earthremoving machinery. Brake facings are available for a similarly varied selection of appliances.

Eagle equipment will be seen on three Bedford municipal vehicles to be shown by Vauxhall Motors, Ltd., Luton (Stand 76). One will be a 3-4-ton longwheelbase refuse collector with a 15 cubic yd. movingfloor body, in which the floor is made of steel mesh and slides on a light-gauge steel plate. A barrier moves with the floor. Four men can be carried in the loaders' compartment behind the cab, The 2-3-ton long-wheelbase chassis will be used as the basis of a side-loading 7 cubic yd. refuse collector, which has three metal sliding covers on each side.

Gully-emptying equipment of 600-gallon capacity will be mounted on the Bedford 5-ton long-wheelbase chassis. The rotary exhauster, which is driven from the power take-off shaft, is fitted with three-way valves to produce pressure or vacuum in the tank. Hydraulic tipping gear is incorporated.