DIESEL TIMES
14th September 1985, Page 49
14th September 1985
Page 49
Page 49, 14th September 1985
— DIESEL TIMES
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
KENT-MOORE UK's K M4058 pressure timing tool enables diesel engineers to time engines fitted with inline fuel injection pumps, without removing the delivery valve spring.
Once connected to the injector pump, inlet, diesel fuel pumped under pressure lifts the delivery valve off its seat and flows out from the spill pipe, clearly indicating the cut-off point when the engine is turned slowly.
A hand-operated, self-priming pump unit is fed by a 2m (6.3ft) hose from a container/filter assembly.
The complete tool is mounted on a carrier tray for storage/ease of use and comes complete with spill pipe, 12/14mm nuts and fuel galley blanking plug.
Kent-Moore, 21 Stockfield Road, Acorks Green, Birmingham B27 6A1.