1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140 
Adjustable supports
Page 59
If you've noticed an error in this article please click here to report it so we can fix it.
Following the introduction of the, adjustable tubular supports for semi-trailers, tankers and demountable bodies, Dunsley Manufacturing (Kinver) Ltd, has developed five heads to suit individual requirements. There is an 8in. flat head for a single centre support; an L-shaped head for a side body support (the supports are used in pairs): a centre-lever, side-loading head designed to support a trailer that enables the tractive unit to be removed and recoupled at the same time; a king-pin support which also fits trailers fitted with an anti-jack-knife device: a spigot head suitable for certain types of tanker the control boxes on which prohibit full travel of operating arm. A four-section adjustable unit is also available for such applications.
Made by: Dunsley Manufacturing (Kinver) Ltd, Mill Lane, Kinver, nr. Stourbridge, Worcs.