AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

New Rutland Overseas Six-wheeler

7th September 1956
Page 49
Page 49, 7th September 1956 — New Rutland Overseas Six-wheeler
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

A NEW Rutland, designed for export.

will be -shown at Earls Court by Motor Traction, Ltd., Rutland Works, Vulcan Way, New Addington, Surrey. It is a six-stiheeler of the bonneted type for gross loads of up to 48,000 lb.

Power is supplied by a Leyland 11.1litre oil engine developing 150 b.h.p. at 2,000 r.p.m., the maximum torque being 450 lb.-ft. at 1,100 r.p.m. In unit with the engine is a five-speed gearbox having ratios of 7.7, 5, 3.12, 1.74 and 1 to 1 and an 8.9 to 1 reverse:

This assembly has a flexible mounting at the front and is supported at the rear by a banjo cross-member rigidly attached to the frame side members. There is also an auxiliary box having a

ratio of 1.328 to I. which can be arranged as either a step-up or -stepdown unit.

Both the bogie axles are driven: they have .the overhead-worm gearing of 8+-in. centres, the ratio being 7.25 to 1. The front semi-elliptic springs of 45-in. centres are 3+-in, wide, whilst those at the rear have 54-in, centres and are 5 in. wide. The rear springs are secured at their centres to a chair mounted on trunnion bearings, the outer ends being in swivelling trunnions. Maximum articulation is 8 in.

The air-operated brakes have 16'}-in.diameter drums, the shoes at the front having 4-in.-wide facings and those at the rear 6-in.-wide facings.