1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138 
New bucket-loader and tailboard lift by Edbro
Page 67
If you've noticed an error in this article please click here to report it so we can fix it.
I New equipment that will be exhibited at Earls Court by member companies of the Edbro group includes a bucket-loader for lb-ton-gross vehicle chassis and a 15cwt tydraulic tailboard loader. Making its debut at Earls Court, the Edbro air-pressure sys:em, designed for operating the combined 3ower take-off and hydraulic pump on air-braked vehicles, will be seen fitted to a lumber of chassis.
The bucket-loader will be displayed by Pilot Works Ltd. on Stand 22. Of the aydraulically-operated lever-arm type, the oader is called the BLB2L and has a length sod width of 24ft and 8ft 2in. respectively. Et will be seen based on a Bedford chassis sad is designed for containers of 16 cu.yd. apacity, the bucket that will be on view laving a capacity of 12 cu.yd.
The lifting arms are controlled by doublesoling hydraulic rams and can lift 12 tons .rom ground level and 91 tons from 2ft bin. )elow ground level. Containers are tipped to
1 an angle of more than 90deg.
Bromilow and Edwards Ltd. will be exhibiting the new Easilift tailboard loader on Stand 25. It replaces the Edbro TG1 unit and is produced as an assembly that can easily be attached with bolts to the rear member of the chassis. Features include a counter-balancing torsion bar that enables the tailboard to be handled by one man. As in the case of the TG1 model, the system is hydraulically operated through a chain drive.