AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Hydraulic workbenches

6th June 1981, Page 67
6th June 1981
Page 67
Page 67, 6th June 1981 — Hydraulic workbenches
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

THE GRAZIA range of hydraulic workbenches has been designed for use in workshops.

They are claimed to contribute to efficiency by enabling the operator single-handed to position the workbench at the height most suitable for his particular requirements.

The workbenches have large and easy-to-clean surfaces and are fully mobile if required. However, with the use of two screw-down jacks they can be secured in any position in the workshop.

With all Grazia models, there are no oil seals under pressure so the workbench should be sal in use at all heights and left in any position for any length of time.

There are two models.

The standard BMT-1r has a lifting capacity of 700 lb, and a front-wheel clamp can be supplied as an extra.

The super model BMT-4r also features a removable panel to allow rear wheel removal, but this model has a lifting capacity of 1,000 lb.

A variant, designated the BMT-4rPN, is a pneumatic version of the BMT-4r and need air pressure of 150 lb in use. Meeton and Ward Ltd, 360 Kingston Road, Ewell, Surrey. Tel: 01-3932840.

Tags

Locations: Surrey, Kingston

comments powered by Disqus