1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168 
Tiverton fold down bulkers
Page 66
If you've noticed an error in this article please click here to report it so we can fix it.
• Newly introduced by Tiverton Body and Container Co. Ltd. is a range of fold-down bulkers which carry both bulk and bagged loads—in the latter case, if required, on pallets. The bodies are of fully heat treated light alloys and the sides, which when folded provide the second floor for carrying bagged loads, are in heavy duty P. G. P. aluminium and are 4ft 2in from the floor, There are no vertical projections to the interior to restrict the flow of the bulk load and the rear end consists of two tailboards. the lower of which also incorporates a limited discharge port. The tailboards are stored neatly against the bulkhead when the vehicle is used as a platform lorry, the detachable centre post and corner posts being carried beneath the underframe.