• • • and this
6th August 1976, Page 23
6th August 1976
Page 23
Page 23, 6th August 1976
— • • • and this
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
Luton tilts
THIS LUTON van body on a Bedford TM chassis is one of six supplied to Kayfoam by Marsden (Coachbuilders) Ltd of Warrington. The interior body length of 8.8m (29ft) and overall width of 2.5m (8ft 21/2in) gives a loading volume of 64cu m (2,300cu ft). To enable the cab to tilt, the front Luton panel hinges forward where it is retained on stays.
The interior height and the rear aperture frame has been designed to accommodate blocks of foam 3.05 x 1,32m (10ft x 4ft 4in).