1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166 
)irection indicators
5th February 1971, Page 123
5th February 1971
Page 123
Page 123, 5th February 1971
— )irection indicators
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
side-position/front-direction Idicator has been produced by P. M.G. Thorpe Ltd in addition to a supplementary side-direction indicator that are designed to comply with the E Scheme of the lighting regulations. Features common to both types include acrylic lenses, ABS base and plated ABS bezel, waterproof base seal and phosphor bronze spade terminals.
Designated the PT 9059:00 model, the side-position/frontdirection indicator has a length of 8.5in. (215.9mm) and a width of 6.0in. (152.4mm). The supplementary indicator is known as the PT 526:00 model and has a length and width of 6.0in. (152.4mm) and 4.58in. (116.35 mm) respectively.
Made by: P.M.G. Thorpe Ltd. Springfield, Yeadon, Leeds LS 19 7YE.