Number: 1508 8.89 E-SERIES ENGINE IMPROVED EXHAUST ADAPTOR — CUMMINS
Page 90
If you've noticed an error in this article please click here to report it so we can fix it.
L10 — VERTICAL STAINLESS STEEL EXHAUST An improved exhaust adaptor is now available for the vertical, stainless steel exhaust system as fitted to Cummins L10 engined E-Series trucks.
The adaptor bolts to the engine brake flange and is supported by brackets and a U-bolt arrangement. Exhaust gases are conveyed across the chassis to the silencer by means of a flexible pipe.
When fitting the Polylock flexible pipe, take note of the direction of gas flow and fit the pipe accordingly to ensure minimal leakage. Care should be taken, on installation, to avoid "lockingup" the flexible pipe by twisting one end of the pipe relative to the other. Before tightening the clips, ensure that the flexible pipe is in its mid-extension position, ie not stretched or compressed.
Parts required are: Exhaust adaptor Part No. 109551-8 Support bracket Part No. 109438-8 Support bracket Part No. 109439-4
The revised exhaust adaptor and bracket arrangement is a product improvement.