AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

2 allet lift

3rd August 1973, Page 53
3rd August 1973
Page 53
Page 53, 3rd August 1973 — 2 allet lift
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Castor-mounted scissors lift esigned to assist movement of allets either from floor-toehicle, vehicle-to-vehicle, or ehicle-to-ramp has been de eloped by Power Lifts.

The Portalift will pivot through :60deg to simplify unloading, as guard rails on each side, spring-Loaded bridge plate at ine end and a 42in .-Iong hy lraulically operated ramp at the ither. The loading ramp is hylraulically inter-locked in the up msition to provide a third "guard ail" when raising the aft by lft 2in. platform, A brake locks he machine when the platform s elevated Lifting capacity is 15cwt, owering 30cwt and the platform 1:.an be raised to 4ft 9in.

The machine is fitted with 3 push-button operated e4ectric/

iydraulic power pack; the 3 hp motor runs off a 415 /440V three-phase mains supply fed

from a flexible cable. A-deadman" device is incorporated into the controls.

Made by: Power Lifts Ltd, Hadley Works, Caxton Way, Holywell Industrial Estate, Watford WD1 8TJ,

Tags

Organisations: US Federal Reserve
People: Hadley Works

comments powered by Disqus