AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

New Equipment and Processes

31st January 1958
Page 49
Page 49, 31st January 1958 — New Equipment and Processes
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Transport Containers Fold Plat

A COLLAPSIBLE container suitable 1-61 for a variety of applications, such as the carriage of -foodstuffs, motor components and other industrial equipment, is announced by the Warwick Production Co., Ltd., Birmingham Road, Warwick.

Two models of the Rctemba, as it is known, are being produced. The RT4 is 30; in. long, In in. wide and 161 in deep overall, and the RT6 has overall dimensions of 301 in. by 23i in by 16+ The respective weights are 29 lb. and 37 lb. and capacities are 3.9 cu. ft. and 5.8 cu: ft. Special sizes can he made to order.

As seen. during a recent demonstration, the model RT6 collapses to a depth of only 3-1 in., whilst erection and collapsing, carried out by a representative of The Commercial Motor, occupied ,about 30 seconds for each operation. The framing of the container is of extruded aluminium-alloy sections, whilst the panels are of five-ply board.

It is claimed that over 100 journeys can be withstood without major damage. It is understood that delivery would at present take 10-12 weeks and that the cost per RT6 container in quantities of 100 is likely to be around 113 Ss. Hire arrangements to consumers are under consideration.

Plastics Storage Bin.

AA STORAGE bin in semi-transparent While polythene, known as the TB250, has been added to the range of Kabi bench assembly trays and storage bins produced by Precision Components (Barnet), Ltd., 13 Byng Road, Barnet, Herts.

Primarily designed for the hanqling and storage of industrial materials and components, the new container may also be used for the handling and storage of meat products and so on.

Reclaiming Used Oil

EGENERATORS combining distillation, absorption and filtration, which work on a physical-chemical principle, are now available from Liquid Systems, Dd.. Norwich Union House. Wellesley Road, Croydon. These Schlegel units are intended for oil, but may also be used for petrol, turpentine, kerosene, nitrosolvents, trichlorethylene and so on.

A small quantity of refining agent, known as F.E., is placed in the open regenerator and thoroughly mixed with the waste oil, after which the lid is closed and the internal pressure raised to approximately 36 p.s.i. by hand pump or

compressor. Further processing is automatic, the electric beating being switched on by the air. pressure provided.

The heat generated. together with the refining agent, is claimed to iniliate a soft refining process by which all oxidizing products dissolved in the waste oil are separated.

Models K.A. and M.A. have a processing period for one charge of one to five hours, depending on viscosily and pollution, and will hold 3.3 gal. and 9.9 gal. respectively.

Dual-purpose Underseal AN underbody coating designed to seal off rust underneath a vehicle body by the addition of phosphates and antirust inhibitors, whilst giving fully rubberized protection, has been introduced in the form of Double-Seal Underbond by Albin Products (Manchester), Ltd., 10 Tonman Street, Manchester, 3. it is non-inflammable and sprays at a low pressure.

Another low-pressure-straying underbody coating known as Quickseal has been produced specially for rapid drying in wet weather and has a spirit base. Both coatings are guaranteed for the life of a vehicle.

New Heavy-duty Batteries ARANGE of commercial-vehicle batteries introduced by the Rockland Battery Co., Hersham Trading Estate, Walton-on-Thames, Surrey, includes heavy-duty models for every type of vehicle.

'the batteries are divided into six main groups, LCV, LWV, BWC, BHR, HRB and DHR. Types LWV and BWC are assembled in hardwood trays, whilst the remainder are encased in moulded hard rubber. All, have heavy-duty plates with dual separators of cedar wood and glass silk. Each battery is covered by a twoyear guarantee.

Tapped Holes for Sheet AQUICK way of obtaining deep tApped holes in thin sheet metal has been introduced in the form of the Riosan Press-Nut by the Instrument Screw Co., Ltd., Northoli Road, South Harrow, Tvliddx, Said to be completely shakeproof, this new captive nut requires only one hole for fixing and may be asiembled from one side of the sheet only.

Molybdenum Disulphide Grease A COMBINATION of bentone grease and molybdenum dimlphide known as Molylone 265 grease, and forming one of three greases in replace the original 7vfolytorte produced by Rocol, Ltd., Swillinglon, Leeds, will be obtainable from this concern after tomorrow_ The new 265 grease replaces the original of 250-280 penetration and is suitable for general grease cups, ball and roller bearings of over 2-in, diameter and operating at speeds up to 2,000 r.p.m. nI5