Body panels
30th August 1974, Page 49
30th August 1974
Page 49
Page 49, 30th August 1974
— Body panels
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
Mitraply is a sheet of plywood faced one or both sides with 1mm thickness of polyester/ glassfibre. This is claimed to give a very hard, weather resistant surface, with good structural strength.
Standard colour is green, and Douglas fir plywood is normally used though other types of wood and thicknesses of the finished panel are available.
The surface can be either smooth or crinkle, and can be supplied in fire retardant form.
Available from: Mitra (Plastics) Ltd, Whittington Road, Oswestry, Shropshire.