1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192 
More wheelbases for Ford D600
Page 73
If you've noticed an error in this article please click here to report it so we can fix it.
TWO extra-tong-wheelbase versions of the
Ford D600 chassis are now available. These are designed for carrying light but bulky loads and the models are obtained by fitting D600 mechanical components in the heavier frame of the D750.
There are now five wheelbase versions of the D600, the additional ones of 15 ft. 2 in., and 17 ft. 2 in. supplementing the existing 10 ft., 11 ft. 2 in., and 13 ft. wheelbase chassis. Apart from the frame which is 10.5 in. by 3.5 in. by 0.276 in., compared with 9.5 in. by 2.97 in. by 0.21 in. on the three shorter-wheelbase chassis, the new versions have a virtually unchanged specification. The only mechanical differences are the use of propeller shafts as on the D750 and the mandatory fitting of 8.25-20, 12-ply tyres.