Ten seconds to drill
29th November 1986, Page 119
29th November 1986
Page 119
Page 119, 29th November 1986
— Ten seconds to drill
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
• Following the launch of its redesigned ADKO DS1A drill sharpener in April ADKO has brought out a pedestal stand to support its drill sharpening machine.
Originally the machine was designed to be bench mounted, but some customers prefer that it should be free standing, as this one is. The pedestal includes a wide tray on which to lay drills, and a removable aluminium cup. The pedestal can be supplied to suit the original 1)S1 machine.
The ADKO drill sharpener re-sharpens drills from 3-30mm diameter. The time to load a drill ready tor grinding, is less than 10 seconds. It costs .2369 plus VAT. The pedestal, tray and water cup is priced at 85 plus VAT.
ADKO Sharpening Machine Co Ltd Wharf Street Warwick CV34 5LB