Precision with flange facers
29th November 1986, Page 100
29th November 1986
Page 100
Page 100, 29th November 1986
— Precision with flange facers
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
• Two portable flange facers from Sibex (Constructions), designated FF24 and FF40, are designed to replace the 618 and the 1840 and give even greater precision, power and portability. These units now accommodate as standard, flanges up to 608mm (24in) and 1,0671nm (42in) an improvement from 458nun (18th and 1,016mm (40in) respectively.
They clamp securely in the flange bore and are operational in any plane, with toolhead adjustable up to 45 degrees and have fully-enclosed helical gear reduction drive and variable automatic radial and down feed