Hydraulic drive
29th March 2001, Page 46
29th March 2001
Page 46
Page 46, 29th March 2001
— Hydraulic drive
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
The hydraulic pumps are powered by the PTO via a dryrunning splined shaft, which needs greasing at every major service. Undo the mounting bolts and remove the pump altogether. Clean the splines, remove any burrs and ensure it can slide easily. Pack the grease around the shaft and reassemble. Use only high-quality mineral oil grease with calcium complex or lithium base.