GREASING & LUBRICATION
28th June 2001, Page 47
28th June 2001
Page 47
Page 47, 28th June 2001
— GREASING & LUBRICATION
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
II To grease the bin lifter's cone-clamp mechanism, first pocket the keys and use the red "stop" button. Then, carefully enter the body hopper and grease the sweep-plate cylinder bearings at the rod and casing ends on each side. While inside, clear any debris from the roof section and see that there's no sign of
chafing, loose connections or air leaks in the wiring loom, TV monitor cables or air pipes. Check the sweep plate mechanism's four proximity switches and their LED indicators. Ensure that water drainage taps in the hopper and body are not blocked.