AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Laird builds iDUKW' at Anglesey

28th June 1986, Page 10
28th June 1986
Page 10
Page 10, 28th June 1986 — Laird builds iDUKW' at Anglesey
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

• Esarco vehicles, based on Land Rover components, are now being built to MoD standard 05-21 by Laird (Anglesea) Ltd.

Twelve of its highly-mobile eightand six-wheel-drive vehicles were exhibited at the BAEE.

All have a box section chassis frame with the One-Ten drivetrain assemblies, suspension, steering and brakes, but use 31+15.5 15 8PR low ground pressure tyres.

One unusual version of the Esarco was an amphibious carrier which had been purchased by a Nigerian customer and is one of the few such carriers built in Britain since World War Two.

Beneath the hull is a standard Esarco 8 x 8 drive arrangement for overland travel, but water-born propulsion is by a 560mm diameter propeller behind and above the rear axle. This is driven direct from the rear of the gearbox on a shaft running on watertight seals.

Tags


comments powered by Disqus