AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Grease dispenser

27th December 1968
Page 41
Page 41, 27th December 1968 — Grease dispenser
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

A unit which provides a rapid and clean method of dispensing a measured shot of grease or similar material, or oils and fluids from either 281b, 112Ib or 400lb open-top containers or 45ga1 screwed bung barrels, has been introduced by Port A Pack Ltd.

Its output is 0 to +lb. of grease or 0 to + pint of oil per shot and it can be pre-set within these limits. Self-contained, the unit only requires connection to a corn

pressed air supply at 80Ib p.s.i. Operation is by means of a hand control—depressed for discharge, released to re-charge the unit in readiness for the next shot, the control being mounted direct on the container or on an adjacent bench. Trolleys to fit the above sized containers can be supplied.

Made by: Port A Pack Ltd., 129a Longon Road, Bexhill-onSea, Sussex.