Small shops get quality
Page 92
If you've noticed an error in this article please click here to report it so we can fix it.
• Minden Industrial's new SATA sprayguns are intended to enable painters even in smaller bodyshops to achieve high-quality results with the latest paint systems.
The SATA LMBS and LMHS guns feature a newly developed 1.3 and 1.6mm nozzle set, known as a "narrowhorn" pattern providing good atomisation with low overspray. As a spraygun for twopack primer application, the new Sata unit can be used even in an open shop without the danger of contamination through excessive overspray.
Many small shops have limited compressed air supplies. The suction-fed LMHS model, however, has been designed to operate on a consumption of just 7.5cfrn approximately (at 3 bar) or 5.5cfm (at 2 bar). The LMBS (the gravity-feed ver
sion of the new gun) requires only 7.0 and 5.0cfm respectively. Despite such low air consumption, both variants can be used with all sorts of modem two-pack acrylic topcoat systems.
Minden Industrial