York follows up with grp van body
23rd August 1974, Page 21
23rd August 1974
Page 21
Page 21, 23rd August 1974
— York follows up with grp van body
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
FOLLOWING the launch of its grp frameless trailer vans last month, York Trailer has followed on with a grp truck van body based on similar components. The front and side body panels are from one-piece sheets of Glasonit — 18 mm (0.71 in) plywood faced each side with glassreinforced plastic. The roof assembly and rear roller shutter are of alloy while the
floors are plywood or plank on steel cross-members spaced at 60cm (24 in) centres.
The new vehicle is offered either as a truck van body or as a conversion to an existing platform body (rigid or trailer). The standard finish of the grp panels is white, but other colours can be supplied if at least five vehicles are ordered.
Tags
Locations:
York