Kent-Moore connectors loom ahead
Page 44
If you've noticed an error in this article please click here to report it so we can fix it.
• Senriceaid loom connectors are an addition to the KentMoore range. When disconnecting vehicle wiring for electrical tests, damage can result to the connector or wiring itself, from age, corrosion, or just brittleness. The KM 4129A loom connector set avoids having to disconnect altogether and therefore alleviates this problem.
The set comprises two clamps which attach to the appropriate loom wires and a screw action pushes a sharp needle through the outer cable and into the main core, making a firm positive connection for electrical tests. The leads supplied with the clamps are then plugged into a multirneter or electrical tester.
When the tests are completed, the clamps can quickly be removed and the small pin hole made in the outer casing of the wiring will reclose. Clamps and leads are colour coded.
Also new in Serviceaid range is the KM 4177 auto starter device for rotating or firing the engine from a position under the bonnet. The engine rotation mode is activated from a rocker switch and makes the setting of clearances etc. a one-man operation. The equipment is fully fused to avoid component damage and comes complete with protective cover and instructions.
Kent-Moore Turbo 62