AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

16 EDBRO

22nd September 1972, Page 167
22nd September 1972
Page 167
Page 167, 22nd September 1972 — 16 EDBRO
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Edbro Ltd (Alloy Body Division), Bolton, Lancashire, 8L3 6DJ.

A tailboard with a heavy-duty locking device is a special feature of an Edbro fixed-sided all-welded-aluminium 22 cu m body on this stand, which is tipped by a 70S9 single-ram gear, the chassis being a Foden 8XB6 /30 model of 21ft 4in. wheelbase. Based on a Dodge K1050 chassis of 147in. wheelbase, a 9 cu yd fixed-sided tipper body is of medium-weight steel construction and is tipped by a 4LNCS single-ram gear. The rams of both body types are front mounted.

A Mark 2 version of the Edbro BLB2L bucket loader is mounted on a Bedford KMS chassis and is equipped with a 6 Cu yd steel bucket. The lift capacity of this model is 91 tons from 2ft 6in, below ground level.