AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

CRAVENS HOMALLOY Stand 51

20th September 1968, Page 180
20th September 1968
Page 180
Page 180, 20th September 1968 — CRAVENS HOMALLOY Stand 51
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Cravens Homalloy (Preston) Ltd., Homalloy Works, Blackpool Road, Preston, Lancs.

A TIPPER BODY, platform body, two ISO containers and a bread van of aluminium construction are included in the exhibits on this stand together with an insulated body of moulded glass-fibre sandwich construction and a second insulated body of glassfibre/polyurethane sandwich construction.

Mounted on an Albion RE33T chassis and elevated by an Edbro 5LN twin-ram' front-end gear, the tipper body is U-shaped and has a length of 17ft 3M. The platform body has a length of 24ft and a width of 8ft, and is based on an Albion Super Clydesdale CD65ALW chassis, while the container is a 20ft by 8ft by 8ft unit and has a laminated floor.

The moulded glass-fibre body has a length of 13ft, is equipped with a Prestcold refrigerating compressor unit and is based on a Bedford KDS chassis having a wheelbase of 135in. while the bread van is mounted on a Ford D200 chassis of 120in.-wheelbase.

A very recent addition to the Homalloy range, the aluminium tanker has a length of 40ft and is mounted on a Homalloy skeletal semi-trailer chassis. The glass-fibre/ polyurethane insulated body is based on a tandem-axle semi-trailer hauled by an AEC Mandator tractive unit.