Bleed screw Holdin g a tube on a hydraulic brake bleed

20th September 1968, Page 114

20th September 1968

Page 114

Page 114, 20th September 1968 — Bleed screw Holdin g a tube on a hydraulic brake bleed

Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

m spanner to release s nipple and using a small always the screw has aays been an awkward and tedious job and to overcome this problem J. W. Pickavant has introduced the JWP381 Bleed Screw Tool,

The JWP381 is double-ended and can be

used on bleed screws which are or gin,as across flats. Two case-hardened connectors are joined together by 18in. clear P.V.C. Each connector is a specially con tubing. ially designed hexagon socket incorporating an internal nylon seal which is pushed over the bleed The bleed screw tool 177 action.

nipple. This provides a leak-proof joint when the bleed screw is released. The spanner size n

for both connectors is On. across flats. Made by: J. W. Pickavant and Co. Ltd., Whitmore Street, Birmingham 18.

Bleed screw Holdin g a tube on a hydraulic brake bleed

Page 114

Tags