AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Hydraulic coupling trailers

20th July 1979, Page 24
20th July 1979
Page 24
Page 24, 20th July 1979 — Hydraulic coupling trailers
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

CRANE FRUEHAUF has traduced a range hydraulically-coupled,deta able front-end, low-loadi semi-trailers.

Four basic models, co prising of 25-ton, 30-ton, t dem, 40-ton and 50-ton v sions utilise a high proport of standard components, F ticularly in the suspension.

Underslung single-I springs are used on the 25model while auxiliary rub springs are added for rating 30 tons. Single-leaf tri-a suspension is employed on 40-ton version and auxili rubber springs for 50-ton to The design of the neck corporates a lock and I location with a substantial gree of tolerance to allow misalignment during coupli Hydraulic rams operat cams, couple, uncouple raise or lower the trailer frc A detachable hydraulic s port, bearing on the fif wheel lead-up ramps, enat the neck to be removed fr the trailer.

A manually detacha neck, using the same cam 5 tern, is offered as a low priced option.

Examples of the range be demonstrated at Crl Fruehauf's Pontypool, W rington and Whitburn sa offices during the week st1 ing July 23 and at Ossett Felixstowe the week start July 31.