Perforated tube
1st November 1968, Page 55
1st November 1968
Page 55
Page 55, 1st November 1968
— Perforated tube
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
Tube Products Ltd. has announced the availability of Tru-Wel aluminized perforated steel tube for exhaust pipes which has a much longer service life than a mild-steel tube and reduces the number of production operations involved in the manufacture of silencers. It has a high resistance to corrosion, a h[gh torsional strength and good concentricity in addition to a low weight.
All sizes of tube in the.li-in. to 2in. outside diameter range, commonly used for exhaust silencers, can be produced in 16 and 18 s.w.g. wall thicknesses. A typical perforation pattern is diameter holes at Lin. staggered pitch, but alternative patterns can be made available as required.
Made by: Tube Products Ltd., PO Box 13, Popes Lane, Oldbury, Warley, Worcs.