AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

New Battery Terminal Reduces Overheating

19th August 1949, Page 36
19th August 1949
Page 36
Page 36, 19th August 1949 — New Battery Terminal Reduces Overheating
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

IN a new type of end terminal at

cable connector, evolved by ti Chloride Electrical Storage Co., 1_13 Clifton Junction. Manchester, the ei terminal is in the form of a flat vertic lug_ The cable end is attached by tv bolts and nuts, the bolts passing throul holes in the terminal lug.

So as to make the cable ends no interchangeable, the holes in the respe tive logs are drilled at different centrt Two forms of cable end are availab that known as the PSV 1 being for straight take-off, and that known as ti PSV 2 for right-angled take-off.

Some of the advantages claimed f this new arrangement, compared vvi the taper-post design, are that increased robustness, greater rigidit increased contact area and hence le voltage drop and less risk of overheking when current demands are high.

Special adaptors are available so tit batteries with the normal tapered pc can be used with the, new cable enc