his bench likes hard work
17th May 1974, Page 57
17th May 1974
Page 57
Page 57, 17th May 1974
— his bench likes hard work
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
Dexion Toughnut workbench is nsidered suitable for heavy-duty ;embly and fitting operations. It sa flat I .2sqm (12.5 sq ft) work sur:e area.
The work surface is supported by avy-gauge channel section steel 1 frames, which can be extended by 4mm (I !Ain) increments to give id working heights between 800mm and 950mm (31.5in and 37.5in). The bench top is of 45mm (I.75in) thick timber and a channel section back plate is fitted along its rear edge for additional rigidity.
A tool drawer and shelf are available as optional extras.
Made by: Dexion Ltd, Dexion House, PO Box 7, Empire Lay, Wembley, Middlesex.