AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Snap-in cable clip

17th March 1972, Page 65
17th March 1972
Page 65
Page 65, 17th March 1972 — Snap-in cable clip
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

A polypropylene snap-in cable clip initially designed for fastening electrical wiring in motor vehicles is available generally from the Fastex Division of ITW Ltd.

For use with pipes or cables up to 7mm outside diameter, the clips are fitted simply by inserting the hollow end stud into a 7.92mm (0.312in.) diameter punched hole, offering up the cable, bending the clip over and pushing home the locking stud.

The cable clip can be used with panel thickness of from 0,91mm {0.036in.) to 1.98mm (0.078in.).

Made by: ITW Ltd, 470-474 Bath Road, Slough SL1 6BJ, Bucks.