4o Trailers for Electricity Service F ORTY 8-cwt. jointers' trailers-have been
Page 53
If you've noticed an error in this article please click here to report it so we can fix it.
suriplied to the" London Electricity Board by the Eagle Engineering Co., Ltd., Warwick. The bodies are made of ;-in. • tongued-and-grooved timber and the lids are waterproofed with steel linings. Hasps and .locks. are fitted. Centre-, members for lid hinges are ins. wide-and have canvas covers over the joints, The lids are 1 ft, 9 ins. deep. A
taildoor is hinged at the bottom. t
The height from the ground to the floor is just under 2 ft. when, laden. Tyres of '4.50 by 16-in. section arefitted and the brake drums measure 8 ins, by li ins. An overrun device and parking lever are located on thedrawbar.
The drawbar eye is suitable for pins of diameter.
Suspension is by semi-elliptic springs. Two drop-down jacks are supplied, one on the drawbar and one on the hear side it the rear. Folding handles are provided for moving the trailer manually.