AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

SPECIAL BODIED VEHICLES BY MARS HALLS

13th June 1975, Page 52
13th June 1975
Page 52
Page 52, 13th June 1975 — SPECIAL BODIED VEHICLES BY MARS HALLS
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Due to a frustrated export order we have been asked by our customers to dispose of these 2 BRAND NEW VEHICLES.

DELIVERY VAN

Chassis. Bedford model KBC10/EHGOBCO Chassis Cab, 115in wheelbase 220 Cu in (3614cc) 4 cylinder dual engine, 5690 Kilo GVW, 4 speed gearbox, mph speedometer, rear shock absorbers, increased engine cooling, laminated windscreen, front bumper guard, heavy duty tie rods, steering column lock.

Body. Interior dimensions—Length 12ft (365cm), width 7ft (213cm), height 7ft (213cm).

General construction all steel. Panelled externally with steel sheet, solid rivetted. Built low on chassis with wheelboxes. Floor of exterior grade plywood. Two revolving ventilators in roof. Rear enclosed with full-depth double doors. Body painted externally in synthetic enamel, hot-spray finish.

MOBILE SHOP Chassis. Bedford Model K DSC /EJM 2 BCO Chassis/Cab, 135in wheelbase, 330 cu iii (5420cc) 6 cylinder diesel engine, gross vehicle weight 8636 Kilo, 7/37 single-speed rear axle, 4 speed gearbox with direct top gear, 8.25 x 16 radial tyres on 6.50H x 16,-5.25 off set 3-piece wheels, 13in HD Clutch, left-hand drive, mph speedometer, increased engine cooling, rear shock absorbers, laminated windscreen, front bumper guard, extreme dust-air cleaner, heavy duty tie rods, steering column lock, idling control, heavy duty filtration.

Body. General dimensions inside—Length 14ft 2in (4318mm), width 7ft 2in (2184mm), height 6ft 8in (2032mm), General Construction. All steel framed, panelled externally with mild steel sheet, solid rivetted. Roof and sides insulated with glass fibre and lined inside with PVC-coated hardboard. Floor of exterior grade plywood overlaid with heavy duty linoleum. Well section at rear. Door to each body side, each with fixed window, leading to single access step . to well floor. Rear of body fully enclosed and fitted with fixed window. Two amber tinted lift-up tyre Weatherfield ventilators in roof. Two off vehicle battery-operated extractor fans fitted to front bulkhead. Three off battery-operated lights in roof. Rear lighting in recessed pans. Counter top—Formica faced, fitted across body with hinge-up access flap, front of counter of plywood, painted finish and fitted with access gate..

Shelving to each side, commencing from counter to front of body and across front bulkhead. Shelves two high, approximately 2ft wide, canted toward body sides and fitted with 4in-high retaining board to front. Similar retaining board fitted at floor level all round, All shelving divided with full height partitions. Interior shelving painted finish. PA system with cassette play-back machine provided.

Enquiries to

Tags