AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Change pattern with SICMO

13th December 1990, Page 104
13th December 1990
Page 104
Page 104, 13th December 1990 — Change pattern with SICMO
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

II The new SICMO 8 spray gun removes many of the problems relating to in-situ spraying, says the manufacturers. The adjustable nozzle produces a heavily atomised cone of air that envelopes the material being sprayed, preventing overspray.

A rotating air cap changes the shape of the spray pattern from round to flat (horizontal or vertide). This allows the gun to repair a paint chip without any overspray or to produce a 550mm spray fan while still having its mist-free characteristics, reducing health and environmental hazards by 80%, says the maker.

Nozzles are available from 0.5mm to 7mm diameter with an air requirement of 0.196m3/min aft3/min) at 3-5bar 145 to 70psil. SICMO 8 is being distributed by Gray-Campling.