Tail-lift for light vans
12th October 1985, Page 21
12th October 1985
Page 21
Page 21, 12th October 1985
— Tail-lift for light vans
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
BCT EQUIPMENT of Kidderminster has added a lightweight parcel lift DLIOPL to its range of tail-lifts suitable for standard vans up to 3.5-tonne GVW.
It is priced at 1:1,025 plus VAT and has a load capacity of 400kg. It is operated by remote control using electrohydraulic power. I he platform, which can be ply-covered or steel meshed, hinges upwards and for storage slides forward into 154mm of the floor area.
The lift weighs 85kg and the column height is 1.07m but these figures vary slightly according to the vehicle type. Fitting takes three to four hours.