1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240 
Vehicle transporter
Page 88
If you've noticed an error in this article please click here to report it so we can fix it.
TATEST vehicle transporter to be added 1-d to the range of "RM" Trailers Ltd., is model 4P50W, which has a carrying capacity of 2.5 tons, and a platform 7 ft. by 14 ft. The tops of the tyres on this model protrude through the deck allowing adequate tyre sizes to be used. At the same time, deck height is reduced to only 2 ft., and loading is further facilitated by the rear end of the trailer, down-swept to a height of 1 ft. 6 in., with two long ramps.
The trailer deck and ramps consist of galvanized expanded metal suitably reinforced underneath, but if required full decking in hardboard can be supplied.
Independent rubber suspension is used, and 10 in. brakes operated in basic form, from the overrun are fitted (with the option of vacuum or air-servo) and obtainable in single or 3-line systems to conform to the new braking regulations.
Made by: "RM" Trailers Ltd., New Farm Road, Alresford, Hants.