Brace and bit
Page 44
If you've noticed an error in this article please click here to report it so we can fix it.
The range of Stenor heavy-duty wheel ,braces has been increased to cover Continental and Scandinavian wheel-nut sizes. With these additions, Stenor says that it now produces zt brace fur the majority of commercial vehicles in use in Britain.
All Stenor braces are available either as separate brace and bar or as a one-piece assembly, and are said to Withstand applied pressures of up to 2712Nm (2,0001bft). The bi-hexagonal socketheads of the new braces come in 27,30 and 32anm sizes.
Also from Stator comes a set of "super stink-on" cold patches for tube repairs. They are available as round patches in six sizes of 30, 40, 50, 65, 80 and 100mm diameter (1f, 11, 2, 2, 31 and 4in), and four oval patches in sizes of 50x25, 65x30, 80x45 and 120x5Ornm (2x1, 2ix1i, 31x11, and 41x2in). The patches may be bought in separate single-sized packets or as a complete repair outfit, which includes 200 assorted patches, solution, a tyre buffer and a 'stitcher.
Made by : Stance Ltd, Richmond, Surrey.