AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Making the Meat

26th September 1947
Page 39
Page 39, 26th September 1947 — Making the Meat
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Keywords :

Ration Go Round

BR ITA 1 N'S critical food situation places upon operators of vehicles carrying foodstuffs special responsibilities in the avoidance of damage to loads and the consequent loss of valuable commodities.

For this reason, particular interest attaches to a new Commer Superpoise 4-5-ton meat Van, with an insulated body built by Wilsdon and Co., Ltd., Solihull, which has recently been delivered to Mr. R. Warburton, of Uttoxeter. It Caused favourable comment when it was first demonstrated at a local abbatoir, in the presence of members of Stoke-on-Trent City Council.

The body is constructed of Noral aluminium alloy and is highly polished inside. The roof is a jig-built unit arranged to carry a load of 60 medium

quarters, and special hooks enable the meat to slide easily along the rails for unloading. As the interior height of the vehicle is 6 ft. 3 ins., the carcases are carried well clear of the floor.

Offal is placed in metal containers, so that no meat need ever touch the floor of the van.

Two ventilators in the roof assist in keeping the interior temperature at a reasonable level and hygiene is promoted by the smooth panel surfaces. Rubber-sealed rear doors, arranged to swing flush with the body sides, prevent the entry of dust. Unloading is assisted by the provision of interior electric lighting.

Mr. Warburton has already placed a repeat order with Newcastle (Staffs) Motor Co.. Ltd., for another•Cornmer vehicle.

Tags

People: R. Warburton

comments powered by Disqus