AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Demountables mean flexible freighting

23rd October 1982
Page 83
Page 84
Page 85
Page 83, 23rd October 1982 — Demountables mean flexible freighting
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Bryan Jarvis points out the developments in double-unit bodies and curtainsiders.

SIER freight movement is bred by the double-unit nountable bodies appearing be Show.

'here has also been further grass with the insulated tainsider, which now offers waved access, increased loads, and, in some cases, igeration of the interior.

and 401

Walker & Son, Gammons e, Watford, Harts

'RESENTATIVE models from h of B. Walker & Son's diviIs are on its Show stand and ar examples of its work can ) be seen on some of the ssis manufacturers' stands. rom its contracts division les the Mess Mate vehicle for maintenance crews, based I Ford Transit. It is equipped .1 self-catering equipment but ) has a separate tool-carrying ipartment in the rear.

mong Walker's accessories he Truckman top developed the Ford P100 pick-up, made -noulded grp and fitted with lir door having a toughened >s window. When fitted, it tsforms the pick-up into a se

load carrier with a capacity lmost 3.5cum (125cuft.) s freight division is showing 'reight Rover Sherpa veiled for Bristol City Counwith Crew Cab body and Aro-hydraulic tipper. The exJed body with added side ir accommodates a crew of he passenger compartment illy trimmed, has fluorescent it and a tool box. Made of riposite construction, its tipis fitted with an integral ladbolster with a full wire mesh I to protect the rear of the

Stand 422

Ray Smith Demountables, Oundie Road, Peterborough THE LATEST product from Ray Smith Demountables is a double-unit demountable body system on a drawbar trailer outfit designed around vehicles running at 7.5 tonnes (7.38 ton) gross.

Ray Smiths' ground-loading demountable body has hydraulic, retractable legs concealed within the body sides.

Guide rollers are located at both ends of the body so that the chassis can pick it up from either end. The unit is displayed in the form of a mobile exhibition and hospitality centre.

The Three-Five demount system for light trucks in the 2 to 3.5 tonne (1.96 to 3.45 ton) range is shown with its automatic front, body locking and orthodox rear twist locks.

Stand 425

Lawrence David, 1 Bishops Road, Peterborough THE REFRIGERATED curtainsider is a further development of Lawrence David's Rol lersider, in which the side curtains fold up to the roof under electrical power.

The curtains are doubleskinned with flexible foam insulation. The insulated Rollersider is particularly suitable for chilled transport providing clear sideentry for fast turn-arounds.

Stand 426

PEM Trailers, Wallisdown Road, Bournemouth A CHILLED-DELIVERY box van mounted on a Ford Transit 190 chassis cab marks PEM's launch into the refrigerated body market. Its body is of grp foam kit construction with approximately 83mm (3.27in) of high density polyurethane foam insulation. With a central plug type rear door and folding rear step, the body is fitted with a Hubbard 480 refrigeration unit for chilled operation.

PEM exhibits a short wheelbase Fiat Ducat°, mounted with its Luton type body which has a capacity of approximately 16.75 cum (598cuft).

The PEM Clipper mounted on continued overleaf a Ford P100 pick-up, is of modular construction with a Luton head, glass fibre roof and rear roller shutter closure giving 5.6cum (200cuft) capacity.

Another PEM exhibit is a grp ply construction box mounted on a Transit 190 chassis cab with diesel engine.

The interior is 3.35m (11ft) long, 2.1m (7ft) wide and 1.9m (6ft 3in) high and it incorporates an insulated roof, a sliding step and step-well, quarter doors, special non-slip floor and interior racking.

Also displayed is its Mark II Luton van, built on a Freight Rover Sherpa 225 chassis cab with a capacity of 1 2cum (429cuft)

Stand 428

Primrose Taillifts, Blackburn, Lancs THE Taillift division of Primrose displays a number of safety features on its products.

An automatic anti-rattle platform lock is shown, which engages when the lift platform is closed and is released manually by a lever set into the underside of the platform.

In the event of a lift cable failure, a wedging mechanism is activated which prevents tail-lift collapse.

Slots in the side columns are shielded by wrap-over channels as a further precaution against accidental damage.

Primrose gives a three-year guarantee and a fitting deal.

Stand 429

Telehoist, Cheltenham, Glos.

TELEHOIST displays a selection of its range of metric, front-end displacement tipping rams including its latest, tank-mounted MSR ram. This improved model has an extended, outer gland unit which permits the removal of either seal or tube without necessitating the complete extraction of the ram assembly from the ail tank in which it is mounted.

On display also is a new, improved 503 Load Lugger, one of six in Telehoist's range of hydraulically powered lever arm demountable container systems.

Originally introduced at the 1978 Motor Show, the improved 503 has rollers placed on the two stabilising jack legs to givi manoeuvrability and ground clearance to th end.

The Load Lugger bed ha moved forward and an oi longer boom arm can i eluded to give maxi payload facility to more vE in the 16-ton gvw range.

The 503 is designed fi with 16-ton gvw two vehicles or 19-ton gvw ov ratings.

Telehoist displays it series power take-off whii be close coupled to a ral gear pumps, including it nine-cylinder pump which totes and reduces the c installation.

Stand 437

Craven Tasker, Staniforth Darnall, Sheffield, ANTICIPATING pos changes in gross ye weights up to 38-tonne.5. Craven Tasker is exhibi new version of its Tasktip features a tapered boct specially profiled chassis beams.

Specification details ii an increased capacity of : (50cuyd) with the top of it level along its entire when coupled to a 1.27m fifth-wheel height.

Also making its debut c yen Tasker's stand is a nei .ing door body called the Taskload which gives ed internal width for refried, insulated or dry freight les.

ulated throughout, the unit low is a 12.2m (40ft) trailer also features an aluim tread-plate floor, grp and tail lift.

rigeration is provided by a i0 unit capable of achieving s 20° centigrade.

signed specifically for itions in the Middle East, new Taskold refrigerated .trailer is also unveiled at lotor Show.

s based on a cirrent Taswhich has been further gthened with floor bearers, licker rubbing plate and y duty Haacon landing legs h are equipped with sand . Mountings for meat rails Irovided in the vehicle exhi skold has a capacity of m and measures 12.2m I long, 2.5m (8.2ft) wide and an overall height of 4m ft).

Ind 438

Melds Coachworks, Bake! Road, Loughborough, )NG the developments Southfields is its Ultra weight 9.1m (30ft) singlesemi-trailer version of the inloada curtainsided body an estimated overall weight 5 tonnes (3.45 tons).

mini Urbanloada, which is Transit-based, is shown; it as extensive use of aluurn framing so that the body Iht is less than 350kg (7711b). 'other new product shown is Super Spider TIR tilt semiK. It has improved access, optional features from exist)odies as standard. Also displayed is an Urbanloada curtain-sided body mounted on a rigid Scania G82M four-wheeled chassis, which features a ratchet device for the curtain end pole.

Stand 441

Boalloy, Congleton, Cheshire.

SOMETHING OLD, something new is the theme from Boalloy for its 1982 Show stand. It displays its first production model of the Tautliner curtainsided trailer from 1969, alongside one of Boalloy's latest creations, its spineback-bodied delivery vehicle.

To illustrate its progress since it was introduced 13 years ago, the original Tautliner, which still works daily for Louis Reece, has been divided centrally, one half being original and the other half brought up to 1982 standards.

The Spineback, which is based on the Localiner, is designed and produced by Boalloy in conjunction with York Trailer Equipment of Corby and features sliding PVC curtains and doors.

By rebuilding the body around its single spine, the loading platform has been lowered from 1.09m (431n) above ground level to 0.51m (201n), and its payload increased to 9.6 tonnes (9.5 tons).

Boalloy also features its latest refrigerated !nsuliner, which is a curtainsided trailer designed for carrying chilled freight at plus or minus five degrees centigrade.

To eliminate projection into the body when dry freight is back loadee, the latest Insuliner is equipped with a Petter refrigerator which has a remotely mounted evaporator to eliminate load encroachment by the unit.

Stand 442

Neville Charrold, Bradderworks, Mansfield, Notts.

NEVILLE CHARROLD's range of tipper and bulk fuel bodies for rigid chassis is represented by four vehicles. An Ultralite bathtub-type body is derived from the original 1972 version, and the much smaller Nipper-type body is designed for chassis grossing up to 3.5 tonnes (3.4 tons).

Two solid-fuel-carrying vehicles are exhibited, the hopper-bodied Auto-bagger with its belt-discharge weighing system, and the pneumatic discharge Tippermatic with its tipping gear recessed into the front bulkhead.

Stand 449

Wefford Truck Bodies, Hainge Road, Worley, West Midlands.

WELFORD features a 3cum (107cuft) light steel tipping body mounted on a Ford Cargo 0809 3.2m (10.5ft) wheelbase chassis.

The Weltip single drop side is fitted with Telehoist FR23 tipping gear. Its internal dimensions are 3.65m (12ft) long, 2.2m (7.2511) wide and its side height is 400mm (1.3ft). Unladen weight is 3.7 tonnes.

Stand 450

Massey International Coachbuilders, High Street, Market Weighton, York MASSEY is displaying a number of exhibits from its considerable range and among them is its refrigerated demountable body which is located on a Ray Smith, • Ten Plus demount frame. Cooling is by the Petter LOC2 diesel unit.

Also on show is its insulated body, mounted on a York drawbar trailer designed to transport crated milk for Peterborough Co-op. It will also accept refrigeration if required.

The trailer is equipped with a QH underrun bar and Clear Pass mud flaps.

An engineering workshop module is shown, which forms part of a ground support unit and is designed for use in the Middle East and Africa. Mounted on a Dodge 50Series is a medium temperature, multi-delivery unit in Walls Meat Co livery which has been manufactured to carry meat products in the 2 to 4.5°C (36° to 40°F) range. Construction is in Unit Panels latest sandwich form and cooling is achieved by a Hubbard plant with condenser and evaporator sections mounted on the front bulkhead.

The compressor for on-road duty is driven by the vehicle's engine and a separate set is operated by plugging in to electric mains for overnight cooling.

Stand 454

Buckingham Vehicles, Dalehouse Lane, Kenilworth, Bucks.

BUILT to order and exhibited by Buckingham Vehicles is a 12,000 litre (2,640 gallon) three-compartment petroleum spirit tank unit, complete with pressure, metering and hosereel equipment to facilitate deliveries of predetermined quantities of gas, oil and kerosene.

The tank and equipment is mounted on a Leyland Freighter 16.13 4.35m (14.3ft) wheelbase chassis.

A detachable manifold is fitted to the faucet outlets and foot valves are rod-operated from ground level. This eliminates the need to climb on the tank top when making metered deliveries.