AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

58 NEVILLE INDUSTRIES

22nd September 1972, Page 171
22nd September 1972
Page 171
Page 171, 22nd September 1972 — 58 NEVILLE INDUSTRIES
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Neville industries (Mansfield) Ltd, &redder Works, Mansfield, Notts.

Of the four tippers being exhibited by Neville Industries, all are of aluminium construction and three are of the all-welded type. Centrepiece of the stand is an example of the Ultralight range that has integrally welded tapered floor runners which obviate the necessity for intermediate side posts and underfloor crossmembers. The body is mounted on a Ford DT2417 24-ton-gvw chassis, has -a capacity of 15 cu yd and can carry a payload of over 16.5 tons. A Ratesaver 26ft tipping trailer has a tare weight of 4 tons 9cwt and is tipped by an Edbro 6SC single-ram gear. A Scammell Routeman 30-ton-gross chassis is displayed fitted with a Nevilloy 18 cu yd all-welded body, while a U-form bolted type of body is shown on a Dodge 16-ton-gvw chassis equipped with an Edbro 4LNS twin-ram front-ofbody gear,

Tags


comments powered by Disqus