• Home
• Used vehicles
• Product news
• Dealer news
• Compliance
• Buying advice
• Archive

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512

19 EDBRO

Zoom page

22nd September 1972

Page 167

Page 167, 22nd September 1972 — 19 EDBRO

Close

Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Please select an option... Headline has errors Article text has errors Article is incomplete Submit

Edbro Ltd, (Steel Body Division), Bolton, Lancashire, 8L3 6DJ.

A fixed-sided U-shaped Huckbolted aluminium body on this stand is of 7 cu m capacity, is raised by an Edbro single-ram front gear with a capacity of 15 tons and is mounted on Albion Clydesdale chassis. Having a capacity of 20 Cu yd a double-drop-sided body is of welded-aluminium construction and is to be seen mounted on an ERF 30-ton-gross eight-wheeler, the tipping gear being a 6ENC single-ram front type. A three-way tipper with a steel body has an aperture in the floor to accommodate a Tuke and Bell gritter, and the top-and-bottom-hinged tail door has detachable pillars. It is mounted on a Ford D1311 chassis.