Fourth-axle Bedford TM
16th February 1979, Page 20
16th February 1979
Page 20
Page 20, 16th February 1979
— Fourth-axle Bedford TM
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
Keywords :
Axle, Bedford Tm
THE FIRST eight-wheel rigid 30-ton Bedford TM has been built by means of a fourth-axle conversion.
The conversion work was done by the Primrose Third Axle Co of Blackburn on the R-registered Bedford TM2600 of Erewash Garage, Elston, Notts. It was previously a 24-ton-gross sixwheeled tipper, but the fourth axle puts the payload up by more than five tons. The chassis weight has gone up by only 17cwt.
The extra axle is a second steering axle fitted 1.9m (6ft 3ins) behind the original steering axle.
The tipper body is a 6.5m (21ft) long Neville-Charrold Ultralite steel body equipped with Edbro single-ram tipping gear.
Tags
People:
Neville-Charrold Ultralite