1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148 
Metal marker
14th April 1972, Page 97
14th April 1972
Page 97
Page 97, 14th April 1972
— Metal marker
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
The Permanetch unit is considered suitable for metal marking work where both short and long run permanent marking operations are required. The unit is a self-contained electrically operated etcher, the size of an electric razor.
Any required mark may be typed, scribed or stamped by the user onto the Permenetch Stencil and an exact replica of this mark can be black or clear etched on virtually any metallic surface in seconds. The stencil will produce up to 80 etches, dependent upon the type of use and may be readily changed for different marks. Dimensions of the marking head, le maximum length and width of mark are liin, x iln, (41 x 22mm).
Made by ; Hymec Engineering Co Ltd, Perk Street, Camberley, Surrey,