Cooling off
8th August 1975, Page 58
8th August 1975
Page 58
Page 58, 8th August 1975
— Cooling off
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
An insulated panel material suitable for refrigerated transport has been developed by Technical Panel Industries.
The panel, called the Glasonit PFP, consists of a sandwich of Bulstrode rigid polyurethane foam faced on ,bodi sides with plywood laminated with grp. The material is rigid enough to form seamless panels of up to 12.2m x 2.44m (40ft x .8ft) without the need for sidepillars of lining panels.
The only support required is the top and bottom rails and front and rear frames, together with vertical internal plywood ribs fitted at approXimately 600mm (2ft) or 1200mm (4ft) centres. Available from : Technical Panel Industries Ltd, Springwood Industrial Estate, Rayne Road, Braintree, Essex.