1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156 
Fuel pump tester
Page 93
If you've noticed an error in this article please click here to report it so we can fix it.
A diesel fuel pump test bench capable of handling all known pumps is produced by Merlin. The Hydra CH1215 /3 has a work table just over 2.5ft-long and is available with either a 15 hp or 20 hp motor, The calibration head is fitted to a swing arm. Allowing left or right-hand location and the calibration tubes have 3COce capacity bottom filling /drain tubes.
The injector de-atomiser chambers are manufactured from clear acrylic and the gauges and calibration tubes are grouped at eye-level. The solid-state electronic shot counter has a range from 100 to 1000 shots, and built in electroscopic phasing can be fitted as an option.
The waste-oil tank has a 5gal capacity and the fluid heater is thermostatically controlled.
The hydraulic variable speed drive permits a speed range from zero 10 6000 rpm.
Made by: Merlin International Engineers Ltd, Winery Lane, Walton-le-Dale, Preston PR5 4AZ.