Another Prize for a Manchester Reader
Page 46
If you've noticed an error in this article please click here to report it so we can fix it.
THIS week's prize-winning idea comes 1 from Mr. L. Corbishley, of Hulme, Manchester, who gains a second award of three guineas.
Sometimes, when removing springs, the shackle pin is fitted in such a way that it is not possible to get a direct hit. A method I have used is to place a heavy weight against the pin and then strike the bracket near the head. If the pin is very tight because of rust then first drive it further in.
Comments Handyman. The method described is one of several in regular use. Others are using a "dog leg" or cranked punch, and a favourite of mine is a homemade impact tool for reverse striking, made as follows: 3 ft. of 0.625-in. or 0-75-in. round rod, equipped with a strong 2-in. foot. The opposite end is stopped by double nuts, and loose on the rod is a 2or 3-1b. round sliding block. Hooked behind the pin the hammer action can be applied well clear of obstructions.