1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148 
• CHECK CONTROL MONITOR
Page 64
If you've noticed an error in this article please click here to report it so we can fix it.
At the centre of the 13518 dashboard sits Steyr's unique Check Control unit which monitors all the truck's systems. A schematic diagram of the chassis indicates an area that may need to be checked out for a problem, while a red or yellow light indicates whether you should do it immediately, or whether it can be left until the truck gets back to base.
In a nutshell, the Check Control system allows routine checks normally carried out by the driver outside the vehicle to be done in comfort from his seat. And if this means that he is less likely to neglect his daily checks on a cold, wet and dark morning, then it must be a good idea.
Oil and water can be added using the fillers conveniently placed to the near side rear of the cab. The cab can be raised hydraulically through 65° providing clear access to all of the major ancillaries and allowing close attention to the engine.