AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Transatorque

28th May 1971, Page 28
28th May 1971
Page 28
Page 28, 28th May 1971 — Transatorque
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

continued from page 19 hydraulic motor and drive assembly weighs about one cwt. It is intended that production units should incorporate a cast aluminium gear casing to reduce the weight significant,ly.

Traction tests on the Bass Charrington outfit in the unladen condition have been carried out by Edbro engineers, using a wetted steel plate to simulate a low-adhesion surface. A 5-ton Salter spring scale, forming a link between the rear of the trailer and a dead weight being towed, registered tractive effort.

The most significant result was that with the trailer axle only driven on dry ground, a tractive effort of one ton was recorded. This was only increased by a further nine cwt. When the tractor's driven axle was simultaneously engaged, with one tractor drive wheel on the wetted steel plate. The tractive effort also only decreased by one

Tags


comments powered by Disqus